Jeng, Tay-Sheng Professor

TEL:
+886-6-275-7575 ext.54158
FAX:
+886-6-274-7819
MAIL: WEB:

 

Position:

  • 2011-Present Chairman of the Department of Architecture
  • 2011 Professor of the Department of Architecture
  • 2006-Present Joint Professor of the Institute of Creative Industries Design
  • 2003 Associate Professor of the Department of Architecture
  • 1999 Assistant Professor of the Department of Architecture

     

Courses

  • Fall:
    • DIGITAL DESIGN FUNDAMENTALS
    • BUILDING INFORMATION MODELING
    • SMART CITIES
  • Spring:
    • Independent studies
    • Design Seminar

Education & Experiences

  • Educations:
    • Ph.D. in Georgia Institute of Technology, USA. (1999)
    • MA in Architecture, UCLA, USA.(1993)
    • BS in Architecture, National Cheng-Kung University (NCKU), Taiwan.(1986)

Specialties

  • Building Information Modeling
  • Smart Cities
  • Smart Buildings
  • Interaction Design

Honor & Awards

  • Ministry of Science and Technology, Taiwan. PI Research Award/Fellowship (2000-2017)
  • Best Paper Award in CAADRIA conferences, 2008
  • Leading IA Lab receiving Prize for Best Presentation in CAADRIA conferences continually in 2001, 2002, 2003, 2004, 2005.

Publications

  1. Refereed Papers
    1. D. Wu, T. Jeng, Pan, C. and C. Lu, “Introduction BIM to Green Building Design- A Case Study in Taiwan”, Journal of the Chinese Institute of Civil and Hydraulic Engineering, Vol. 28, No. 2, 2016.
    2. Pan, C. and T. Jeng, “A Study on Kinetic Building Skin for Intelligent Robotic Architecture”, Taiwan Journal of Architecture, September, 2014.
    3. Lin, H. and T. Jeng, “WorkSense: the Design of Future Workplace”, Lecture Notes in Computer Science (LNCS), Springer-Verlag. 2013.
    4. Shen, Y., P. Chen, and T. Jeng, “Design and Evaluation of Eco-feedback Interfaces to Support Location-based Services for Individual Energy Conservation”, 
Lecture Notes in Computer Science (LNCS), Springer-Verlag. 2013.
    5. Chen, P., T. Jeng, Y. Deng, and S. Chien, “GreenSense: Developing Persuasive Service Technology by Integrating Mobile Devices and Social Interaction for Sustainable and Healthy Behavior”, 
 Lecture Notes in Computer Science (LNCS), Springer-Verlag. 2013.
    6. Lin, H., T. Jeng, and C. Chen, “Reimaging Humane Cities: Interaction Design, City Sense, and Smart Living”, International Journal of Affective Engineering, Vol.12 No.2, pp. 1-5, 2013.
    7. Pan, C. and T. Jeng, “Cellular Robotic Architecture”, International Journal of Architectural Computing, Issue 03, Volume 10, 2012.
    8. Ma, Y., T. Jeng, Y. Shen, and P. Chen, “iAWN: An Ambient Affective Medium for Meditative Use and Emotional Awareness in Home”, International Journal of Digital Content Technology and its Applications (JDCTA), Vol. 5, No. 10, pp. 372 ~ 380, 2011.
    9. Shen, Y. T. Jeng, and Y. Hsu, “A“Live”Interactive Tagging Interface for Collaborative Learning”, Lecture Notes in Computer Science (LNCS), Vol. 6874, 2011, Springer Verlag.
    10. Chen, P. and T. Jeng, “Livindex: Situational Energy Awareness for Sustainable Living”, Architectural Science, No. 2, pp. 35-47, December 2010.
    11. Tasi, C., C. Chen, T. Jeng, and H. Hsu, “Interdisciplinary Collaboration for Digital Content Service Design”, International Journal of Organizational Innovation, Vol. 3., No. 1, 2010, pp. 127-155.
    12. Chen, J. Y. Ma, T. Jeng, C. Chang, “An Assessment of User Needs for Intelligent Living Space”, Journal of Intelligent Buildings International, Vol. 2, No. 1, 2010, pp. 20-40.
    13. Mou, T., T. Jeng, and C. Ho, “Sociable Kitchen: Interactive Recipe System in Kitchen Island”, International Journal of Smart Home, Vol. 3, No. 2, 2009.
    14. Jeng, T., “Toward a Ubiquitous Smart Space Design Framework”, Journal of Information Science and Engineering (JISE), Vol. 25, No. 3, 2009.
    15. Jeng, T., C. Chen, J. Wang, C. Wu, J. Yang, S. Cheng, J. Fang, and P. Chung, "House of the Future Relies on Multimedia and Wireless Sensors", SPIE Newsroom, 2008. (http://spie.org/x19165.xml?highlight=x2414)
    16. Jeng, T., "Sentient Buildings that Sense, Think, and Adapt", NCKU BANYAN Research Express, Vol. 2, Issue 10, January, 2008. (http://proj.ncku.edu.tw/research/articles/e/20080104/1.html)
    17. Jeng, T and C. Lee,“Tangible Design Media: Toward an Interactive CAD Platform”, International Journal of Architectural Computing, Vol. 1, Issue 2, 2003, pp.153-168.
    18. Lee, C. and T. Jeng,“A Context Manager for Tangible Media Design Presentation: A Human-Centric Interaction Approach”, International Journal of Automation in Construction, 12, 2003, pp. 487-493. [SCI]
    19. Jeng, T., S. Chen, C. Lee, and P. Huang, "Developing Asynchronous Collaborative Design Environments: An Experimental Study", The International Journal of Design Computing, Vol. 3., 2001, (Best Presentation in CAADRIA2001) http://www.arch.usyd.edu.au/kcdc/journal/index.html
    20. Jeng, T. and C. M. Eastman, "Design Process Management", Computer-Aided Civil and infrastructure Engineering, 14, 1999, pp. 55-67.
    21. Eastman, C. M. and T. Jeng "A Database Supporting Evolutionary Product Model Development for Design", Automation in Construction, 8, 1999, pp.305-323. [SCI]
    22. Jeng, T. and C. M. Eastman, "A Database Architecture for Design Collaboration", Automation in Construction, 7, 1998, pp. 475-483. [SCI]
    23. Eastman, C.M., D.S. Parker, and T. Jeng, "Managing the Integrity of Design Data Generated by Multiple Applications: the Principle of Patching", Research in Engineering Design, vol 9, pp. 125-145, 1997. [SCI]
    24. Jacobsen, K., C. M. Eastman, and T. Jeng, "Information Management in Creative Engineering Design and Capabilities of Database Transactions", Automation in Construction, 7, 1997. Pp. 55-69. [SCI]
  2. National Conference
    1. Weng, Y., J. Chen, Y. Ma, C. Pan, and T. Jeng, “Eco-Machine: A Green Robotic Ecosystem for Sustainable Environments”, Proceedings of the 18th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2013), 2013, May, Singapore.
    2. Wu, T. and T. Jeng, “Reforming Design Studios: Experiments in Integrating BIM, Parametric Design, Digital Fabrication, and Interactive Technology”, Proceedings of the 30th International Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe), September 12-14, Prague, Czech Republic, 2012.
    3. Hsu, Y, T. Jeng, Y. Shen, and P. Chen, “SynTag: A Web-based Platform for Labeling Real-Time Video”, Proceedings of the 2012 ACM Conference on Computer Supported Cooperative Work (CSCW), February 11-15, 2012, Seattle, Washington.
    4. Pan, C. and T. Jeng, “Mechatronic and Interactive Design for Kinetic Architecture”, Proceedings of the 11th International Conference on Automation Technology, November 18-20, 2011, YunTech, Douliu, Taiwan.
    5. Shen, Y. and T. Jeng, “A“Live”Interactive Tagging Interface for Collaborative Learning”, Proceedings of the 8th International Conference on Cooperative Design, Visualization and Engineering (CDVE), September 11-14, 2011, Hong Kong.
    6. Pan, C. and T. Jeng, "Exploring Sensing-Based Kinetic Design for Responsive Architecture", Proceedings of CAADRIA2008, April 9-12, 2008, Chiang Mai, Thailand. (Prize for Best Paper)
    7. Jeng, T., "Physical Prototyping of Interactive Space", Proceedings of CAADRIA2007, April, Nanjing, China.
    8. Chen, J. Y. and T. Jeng, "Using Personal Service Assistant for Direct Manipulation in Smart Space ", Digital Architecture and Construction, A. Ali and C. A. Brebbia [Eds.], Seoul, Korea, 2006, WIT Press.
    9. Jeng, T. “Advanced Ubiquitous Media for Interactive Space: A Framework”, Proceedings of CAADFutures, Vienna, Austria, 2005.
    10. Chen, J. and T. Jeng “A Context-Aware Home for Child-minding”, Proceedings of CAADRIA2005, New Delhi, India. (Prize for Best Presentation)
    11. Lin, H., Y. Shen, and T. Jeng “IP++:Computer-Augmented Information Portal in Place”, Proceedings of CAADRIA2005, New Delhi, India.
    12. Jeng, T. “Designing a Ubiquitous Smart Space of the Future: The Principle of Mapping”, Proceedings of 1st International Conference on Design Computing and Cognition, MIT, USA, 2004.
    13. Kuo, C., H. Lin, Y. Shen, and T. Jeng, “Mobile Augmented Reality for Spatial Information Exploration”, Proceedings of CAADRIA2004, 2004, April 28-30, Seoul, Korea. (Prize for Best Presentation)
    14. Jeng, T. and J. Lee "iCube: Ubiquitous Media Spaces for Embodied Interaction ", Proceedings of CAADFutures2003, April 28-30, 2003, Tainan, Taiwan.
    15. Lee, C., Y. Ma and T. Jeng “A Spatially-Aware Tangible Interface for Computer-Aided Design”, Proceedings of ACM Computer Human Interaction (CHI2003) (extended abstract).
    16. Ma, Y., C. Lee, and T. Jeng “ iNavigator: A Spatially-Aware Tangible Interface for Interactive 3D visualization”, Proceedings of CAADRIA2003, May, 2003, Thailand. (Prize for Best Presentation)
    17. Chen, J. and T. Jeng, “Exploring Digital City with Physical Interactions”, Proceedings of CAADRIA2003, May, 2003, Thailand.
    18. Jeng, T., Chia-Hsun Lee, Chi Chen, and Yu-Pin Ma " Social and Interaction Issues in a Human-Centered Reactive Environment", Proceedings of CAADRIA2002, Malaysia, 2002.
    19. Lee C-H, Jeng, T." A ContextManager for Multimedia Presentation in Intelligent Corners", Proceedings of CAADRIA2002, Malaysia, 2002. (Prize for Best Presentation)
    20. Jeng, T. "Managing Process Dependencies for Dynamic Coordination", Proceedings of The Ninth International Conference on Computing in Civil and Building Engineering (ICCCBE-IX2002), April 3-5, 2002, Taipei, Taiwan
    21. Jeng, T. and S. Chen, "CoDesign Map: Articulating Inter-disciplinary Design Issues in Shared Workspaces for Collaborative Learning", Proceedings of The Ninth International Conference on Computing in Civil and Building Engineering (ICCCBE-IX2002), April 3-5, 2002, Taipei, Taiwan
    22. Jeng, T. "Coordination of Distributed Design Activities: A Rule-Based Approach", Proceedings of CAADFutures, Eindhoven, The Netherlands, July, 2001.
    23. Jeng, T., S. Chen, C. Lee, and P. Huang "Developing Asynchronous Collaborative Design Environments: An Experimental Study", Proceedings of CAADRIA2001, Sydney, Australia, April, 2001. (Prize for Best Presentation)
    24. Lan, J. and T. Jeng. "Enhancing Shared Understanding in Collaborative Design Communication", Proceedings of CAADRIA2001, Sydney, Australia, April, 2001.
    25. Lee, J., C. Pand, and T. Jeng, " Controlling Inter-Process Coordination in a Web-Based Collaborative Environment", Proceedings of CAADRIA2001, Sydney, Austria, April, 2001.
    26. Jeng, T. and M. Chiu "Web-Supported Participatory Design: A Framework for Social Interaction", Associated Proceedings of Co-Designing 2000 Conference, Coventry, September, 2000.
    27. Jeng, T., "Towards a Process-Centric, Asynchronous Collaborative Design Environment", Proceedings of CAADRIA2000, Singapore, May, 2000.
    28. Jeng, T. and C. M. Eastman, "A Database Architecture for Design Collaboration", Proceedings off TeamCAD Workshop, Atlanta, May, 1997.
    29. Eastman, C.M., T. Jeng, A. R. Chowdbury, and K. Jacobsen, "Integration of Design Applications with Building Model", CAAD Futures'97, Munich, Germany, August, 1997.
    30. Jeng, T. and C.M. Eastman, "Process Management in a Data Integrated Design Environment", Proceedings of CIB Workshop on Computers and Information in Construction: Modeling of Buildings through their Life-cycle, Stanford, California, 1995.
    31. Eastman, C.M., H. Assal, T. Jeng "Structure of a Product Database Supporting Model Evolution", Proceedings of CIB Workshop on Computers and Information in Construction: Modeling of Buildings through their Life-Cycle , Stanford, CA, 1995.
    32. Eastman, C.M., M-S. Cho, T. Jeng and H.H. Assal, "A Data Model and Database Supporting Integrity Management Across Heterogeneous Applications", Computing in Civil Engineering: Proceedings of the 2nd Congress, A/E/C systems, Atlanta, GA, June, 1995.
  3. Books
    1. Jeng, T., Interactive Architecture: Space as Medium, Interface, and Robot, Garden City Publishers, 2011
    2. Jeng, T., “Interactive Architecture: Spaces that Sense, Think, and Respond to Change”, Computational Design Methods and Technologies: Application in CAD, CAM and CAE Education, N. Gu and X. Wang (eds.), Information Science Reference, 2012.
  4. Exhibitions
    1. C-HUB:Creative Hub Building Design for Innovation and Entrepreneurship, 2013-2014
    2. Aspire Home- A Smart Home of the Future, NCKU, 2006-2008
    3. "Taiwan New Landscape Movement" interactive media exhibition,Taipei, Kaohsung, Taiwan, (2004/10-2005/2)
    4. "Information Architecture" interactive media exhibition,Creative Education Expo, Taipei, Taiwan, (2004/2/13-2004/2/15)
    5. "Building Life Cycle" media exhibition,National Museum of Taiwan Literature, Tainan, Taiwan, (2003/10-2004/4)
    6. "Digital Media and Architecture", NCKU Art Center, Tainan, Taiwan, (2003/4/25-2003/5/1)

Project & Works

  1. Ministry of Science and Technology Projects
    1. BIM Smart Objects in a Knowledge-Enabled Cloud-Based Platform, 07/1/2016 -06/31/2018
    2. BIM-enabled Parametric Interaction Design Platform for Interactive Architecture, 07/1/2014 - 06/31/2016
    3. A Brain-Computer Interactive Space that Reads Minds, 07/1/2012- 06/31/2014
    4. Classroom 2020, 07/1/2011 - 06/31/2012
    5. The AWN Project: Exploring the Aesthetics, Well-being, and Network of Smart Living Spaces by Open Innovation Design Methodology and Home Living Experiment, 07/1/2010- 06/31/2012
    6. Development of Interactive Wall Modules for Active, Responsive, and Robotic Architectural Space, 07/1/2009 - 06/31/2012
    7. Center for Human-Centric Smart Living Technology, 02/1/2008 - 01/31/2011
    8. Interactive Architecture Design Studios, 07/1/2009- 06/31/2010
    9. Physical Prototyping of Modular Smart Living Space, 07/1/2007 - 06/31/2008
    10. IP++: Information Portal and Infilling in Smart Networked City
    11. Mobile Augmented Reality Campus: Developing a Real-Time Spatial Knowledge Exploration System (NSC92-2211-E-006-087) 08/1/2004 - 07/31/2005
    12. Ubiquitous Smart Spaces: The Theory and Practice of Mapping (NSC92-2211-E-006-087) 08/1/2004- 07/31/2005
    13. On the Development of Physical Computing Modules for Interactive Media Spaces (NSC92-2211-E-006-087) 08/1/2003 - 07/31/2004
    14. Taiwan City Digital Museum (NSC91-2422-H-006-3002) 03/1/2002- 02/28/2003
    15. Experimental Study of International Collaborative Design- Interface Design for Asynchronous Interaction (NSC91-2211-E-006 -117) 08/1/2002- 07/31/2003
    16. A XML-Based Design Coordination Model Supporting Mobile Office (NSC90-2211-006-094) 08/1/2001- 07/31/2002
    17. Web-Supported Social Interaction of Design Process (NSC89-2211-E-006-153) 08/1/2000- 07/31/2001
  2. Ministry of Education
    1. NCKU Smart Campus, 06/1/2016 - 12/31/2018
    2. Creative Delta: Connecting Universities, Cities, and Industries, 07/1/2015 - 12/31/2016
  3. Ministry of Interior, Architecture and Building Research Institute
    1. A Pilot Study of BIM Cloud Applications and AEC 4.0, 01/1/2016 - 12/31/2016
    2. BIM Components and General Format, 01/1/2015 - 12/31/2015
    3. BIM Green Building Design, 01/1/2014 - 12/31/2014
  4. General Projects
    1. "Critical Techniques and Core Components of Smart Living Space", Taiwan Architecture and Building Center, May, 2007.
    2. "Design of Smart Living Space Modules", Industrial Technology Research Institute of Taiwan (ITRI), December, 2006.
    3. 3D Digital Museum for National Museum of Taiwanese Literature, 10/1/2003- 04/1/2004

Students

  • Honors for Students
    • Pan, Cheng-An,, Best Paper Award (CAADRIA2008),Chiang Mai, Thailand, April, 2008.
    • Chia-Hsun (Jackie) Lee, Prize for Best Presentation (CAADRIA2002), Malaysia. (Jackie has been a researcher in MIT Media Laboratory 2003-2005).
    • Yu-Pin Ma, Prize for Best Presentation, (CAADRIA2003), Thailand.
    • Chyi-Gang Kao, Prize for Best Presentation (CAADRIA2004), Korea.
    • Jia-Yih (Joy) Chen, Prize for Best Presentation (CAADRIA2005), New Delhi, India.

Conference Participation

  • Guest Editor, International Journal Architectural Computing, Vol. 1, Issue 4, 2003, Multi-Science Publishing.
  • Guest Editor, International Journal Architectural Computing, Issue 4, 2005, Multi-Science Publishing.
  • Vice Chair, CAADFutures2003, October 15-17, Tainan, Taiwan, 2003.
  • Advisory Board, The 1st International Conference on Design Computing and Cognition(DCC), MIT, USA, 2004.
  • Session Chair, CAADFutures2001, Eindhoven, The Netherlands, July, 2001.

活動資訊

To be anounced

演講資訊

To be anounced